Using burlap aids in safeguarding fine tree roots as they get taken from the nursery to your house. But then the question becomes, "when planting a tree, do I remove the burlap?“
Planting Trees with Burlap
Burlap keeps trees together until they’re securely put into a planting hole. At this stage, you can take off most of the burlap.
Take the Burlap Off When Planting
Yes, and you should remove as much as you can. Once the tree is put safely in the hole, slice and take off the burlap from around the bottom of the trunk. Next, work your way down the root ball and eliminate as much burlap as you can.
This can aid in lessening the possibility of girdling roots and dehydration. That’s when the roots develop near the trunk and hinder the tree’s ability to carry nutrients and water.
Wire Baskets and Planting Trees
If you are using wire baskets instead of burlap, take off at least the top third of the basket from the root ball. That's all you have to do.
If you attempt to take off more, you raise the possibility that the root ball will start to deteriorate and tear apart.
Planting a Tree Wrapped in Burlap
To move your tree, hold or roll it by the root ball. Don’t ever move it holding on to the branches or trunk.
Dig a saucer-shaped hole as deep down as the root ball and twice as big.
Place your tree, so the spot where the roots connect to the trunk is slightly above or at the ground — that known as the root flare. The greatest mistake is folks planting new trees too deep. Also, be sure the ground under the root ball is stable so that the tree doesn’t sink lower due to its weight.
Cut the cord and take the burlap off from around the trunk base and the root ball top. It’s difficult to tell the difference between organic and synthetic. Sometimes, organic burlap doesn’t decompose correctly.
If you aren’t sure about removing the burlap on your own, contact an arborist to do the job for you.
If you’ve ever looked at a cherished tree in your landscape and thought, “it would look much better over there,” you’re not alone. Plenty of property owners decide to move a tree, but wonder “how it will cost to transplant a tree?”
Well, to get the answer to this question, keep reading to find out what things go into an estimate.
Cost to Transplant a Tree
There’s no general cost for tree transplanting service. Instead, tree care specialists use details about your tree and your landscape to create an estimate.
Many factors go into a tree transplanting estimate. The price differs based on things such as the location of the tree and the size of the tree. Another issue to consider is if the transplant job requires a large crew to dig by hand or special equipment.
Before an arborist gives you an estimate, he’ll get every detail of the project such as:
Tree Size - As you can believe, moving an enormous, massive tree from point A to point B necessitates more work than moving a modest-sized tree. In some instances, your tree contractor might recommend not moving a big tree. The bigger the tree, the more significant the possibility there will be adverse effects from root system loss all through the preparation phase and ecological effects after the transplant.
Time - Tree care experts typically work by the hour. So, difficult tasks need more time and therefore, cost more money. With that being said, when you work with arborists, they’ll be clear and truthful about how much time a job will take and how they’ll get it done effectively so you can feel assured about the cost.
Equipment and Crew - To be safely transplanted, some trees require a crew of arborists and specialized equipment, which increases the total cost. On the other hand, little trees typically don’t need as much and make for a less costly job.
Transplanting a tree is an excellent alternative and an earnest money saver. You can move your tree from one spot to another in your landscape or from another property. It's a fantastic way to bring new life to your outdoor area at a real low-cost when compared to the price of purchasing a new tree.
With full pipes going deep all through your yard, trees near a septic tank create lots of questions about what and where you can plant trees. Keep reading the article below to find out what trees are safe to plant near a septic tank.
What Trees are Safe to Plant Near a Septic Tank
It doesn’t matter what you’ve read. This isn't crazy. The right type of tree can aid the system by avoiding erosion and keeping the water running smoothly.
Plants that work best usually have delicate, green stems and are well-adjusted to the rainfall in your area. This includes wildflowers, grass, annuals, bulbs, and perennials. Trees are okay as long as you pick one with shallow roots and put it a reasonable distance away from the septic tank. If you want to know which trees should go near your septic tank, contact a company that specializes in tree service in York.
Are Fruit Trees, Oak Trees, or Japanese Maple Trees Okay to Plant?
It can be done, but it’s a complicated situation. Tree roots are compelled to follow the water. So, if you plant shrubs or trees too close to your septic system, they can cut into the pipes and jam them, which destroys the system and the water flow to and in your home.
The plants named above are typically a better choice for planting near a septic tank. Truthfully, you can put flowers like those as well as grass right over the system.
When planted correctly, trees with non-invasive, shallow roots are not a problem to use. That means both crabapples and white oaks are appropriate choices. You’ll possibly want to avoid Japanese maple trees. Maples are infamous for blocking pipes.
Other fruit trees aren’t a solid match either. Any vegetation put near your septic tank might be in danger from viral or bacterial contamination.
The bottom line is if you want to plant any type of foliage near your septic tank, get in touch with a tree care specialist to find out if you can what trees or plants you should use.
Everyone loves the gooey, golden goodness of maple syrup. We’re talking about the good stuff here. Right from the tree, 100% pure maple syrup. It’s sweet like caramel, but with a shot of environmental woodiness. If you’re wondering how to tap maple trees for syrup, you probably also want to know if tapping your maple trees will damage them.
Read on if you want to find out if you can tap and collect maple syrup without hurting your cherished maple trees.
Tapping Doesn’t Damage Maple Trees
Trees are tough. They can mend from a tiny hole so that you can collect their maple syrup.
Why Not Any Damage?
Drilling a hole creates a wound. But if done correctly, your tree can withstand tapping. So How do you tap a maple tree?
When you drill a hole to tap your tree for maple syrup, it’s usually 2” deep and less than a half an inch wide. To your mature 50-foot maple, that’s an itsy, bitsy hole.
Also, the spot you drill through is full of tiny vessels that let the sap flow. Hurting a few is no big deal. If you aren’t confident about drilling a hole in your maple tree, hire a York arborist to do the task for you.
By the time you take the spout out at the close of the season, your tree will start to repair itself. It will develop new wood to shield its wound. Within a couple of years, the hole will be covered entirely. If you think the wound is not closing properly, contact a local arborist to evaluate the health of the tree.
Reducing the Chances of Damaging Maple Trees
Tapping maple trees is an age-old hobby. The procedure is not complicated, and you can learn all you have to know in one season. When you have the tools gathered, it takes no more than five minutes to tap a maple tree. You can enjoy naturally fresh maple syrup.
We at York Tree service want to provide you with helpful tips and information about services your trees. Contact us if you need tree service at your property.